Triumphrat

HOTRODSRJ · 09-25-2006, 05:28 AM

I bought the Kuryakan turn signal mirrors and am having a time understanding the hokey mounting system?

I bought the metric 10mm conversion adapters and I can't see how this is supposed to work? I have researched on here that there are maybe other adapters from Ma's and if so...does anyone have a picture and/or explanations or are these the same adapters as I have?

Looks like I need to get the lathe out?

Any help greatly appreciated!

Jimbeamrye · 09-25-2006, 08:03 PM

I bought like mirrors with the adapters for my honda and they worked flawlessly. So I believe your bikes original mirrors have a "special" Triumph mount. Were the adapters for a Triumph?

I know this post isn't much help, but the post I made is more of the fact that those adapters are vehical specific.

travelguy · 09-25-2006, 10:25 PM

steve check r3.net.. pig9r did a great write up on this install.

HOTRODSRJ · 09-26-2006, 07:00 PM

Thanks for the tip.... contacted Ma's for their adapter!

Trapper · 09-26-2006, 07:17 PM

I put Muth signal mirrors on my R-111. I had to make a spacer about 1" long and then I had to get a longer bolt, but it was easy to do. I ran the wires down to the front turn lights and connected them there. When I got done you can't even see the wires. If you want more INFO let me know. To see the muth mirrors to see if there the same check this web site.http://www.customdynamics.com/Signal_mirror.htm

Trapper :hammer:

HOTRODSRJ · 09-29-2006, 05:25 AM

Wow... the Ma's adapters for the mirrors are the trick! You will need one of the longer bolts from the Harley mirror kit included with the mirrors! Slick!

Thanks for the tips and info! Pics later!