help please i need torque settings

[loveTrumpet]

Hi All can anyone help i need a list of engine cover torque settings

just got a s/steel bolt set but no workshop manual

1. clutch cover
2. gearbox sprocket cover
3. clutch slave cylinder
4. l/h crank cover
5. r/h crank cover
6. r/h front balencer shaft cover
7. water pump
8. starter gear cover early models
9. hose cover behind block
10. cam chain tensioner

all bolts are m6

Hi ya,
1. clutch cover - 12 Nm
2. gearbox sprocket cover
3. clutch slave cylinder - Do you mean "Slave cylinder to sprocket cover" (9Nm)?
4. l/h crank cover and 5. r/h crank cover - Crankcase (Upper to lower M6) 12Nm. Generally, Crankshaft covers 12Nm
6. r/h front balencer shaft cover - "Balancer cover RHS" 12Nm
7. water pump - "Water pump mounting bolts" 10Nm
8. starter gear cover early models ?????????
9. hose cover behind block ????????
10. cam chain tensioner - "cam chain tensioner body to cyl head" 9Nm
SUMMARY - Looks like M6 generally 9 to 12 Nm.
Hope this helps
Oddball

If you plan to do any work beyond replacing a few bolts, you'll need at least a Haynes manual. Here's one on eBay UK for £13 shipped.

The terminology you're using isn't quite the same as in my Haynes, but most of the stuff you list is to be torqued to about 10 Nm.

HTH,
-Kit

[loveTrumpet]

thats brilliant oddball thank you very much for your help

[loveTrumpet]

Thanks All