Triumphrat

Zandor · 03-21-2009, 06:58 PM

Started to replace chain and sprockets on my '95 S3 today, but Murphy showed up almost immediately. I don’t know the size of the large engine mount bolt at the bottom of the sidestand bracket. Neither the factory manual nor Haynes comment on this. Is it just a big ole Torx? What size? Thanks for any and all advice.

- Zan

daytona 750 · 03-21-2009, 08:57 PM

i cant remember the size off the top of my head, but if no one else has made a sugestion by the time i get up in the morning, i will go out to the garage and find out what size it is for you.

KiwiGeoff · 03-22-2009, 06:45 AM

Been there just recently - its a torx size T55. You will also need to beg borrow or steal a 36mm socket for the countershaft sprocket.

Cheers Kiwigeoff

MotT3 · 03-22-2009, 07:14 AM

Good luck with it....you probably better at this than me but..these might help..?

Cheers
Mot

http://www.mottleybiker.com/page30.htm

http://www.mottleybiker.com/page31.htm

Zandor · 03-22-2009, 07:33 AM

Thanks for the assistance guys. Mot, your site is the other place I'd checked for the size.

- Zan

MotT3 · 03-22-2009, 07:43 AM

Best I get in there and edit it...

Thanks