Triumph Rat Motorcycle Forums banner

Rear wheel/hub bearing question

766 views 4 replies 3 participants last post by  Flyinace1 
#1 ·
I'm looking for the bearings for the rear wheel on my sprint st 1050. There don't seem to be any aftermarket bearing kits from motorsport companies, am I missing something? I was also surprised that bikebandit doesn't list the bearings, except for the needle bearings. So I was looking at contacting a bearing supplier but the needle bearing comes with or without the inner ring. Which do we need for our bike?

Sent from my HTC6545LVW using Tapatalk
 
#4 ·
I replaced all the bearings in the rear wheel assembly two months ago and ordered them at my local Triumph dealer. They were all available and no back orders. TIP: Be careful when inserting the axle into the hub. The needle bearings could come out of the race. I centered mine as well as possible spun the axle slowly while inserting it. Good Luck!
 
#5 ·
Thanks. I'm going to have a private shop do it. I decided to go with triumph parts because the 3rd party stuff was close to the same price and would still take over a week to arrive. Then when I called a couple triumph dealers I got the same answer from both. That they would need to research availability
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top