D & D Exhaust Pics

[Wolf]

Or just get Tridents which have a baffle and are longer...

On a serious note - if someone would like to let me have the inlet dimensions of the D&D I'd be happy to see if we can make up a baffle to fit that will take the edge off.

[elevens]

Originally Posted by Wolf

Or just get Tridents which have a baffle and are longer...

On a serious note - if someone would like to let me have the inlet dimensions of the D&D I'd be happy to see if we can make up a baffle to fit that will take the edge off.

Pretty amazing offer coming from a competitor. Hat's off to ya Peter.

[Aussie Sprint]

Fingers crossed someone has the inlet dimensions so I don't have to take mine off.

How would that work Peter? Is it a slip inside baffle at the beginning of the one into three pipe, or a slip in to each of the three polished exhausts?
How much difference do they make to your exhausts in note?

The D&Ds need to go from 'American obnoxious loud' (standing by to be flamed by my US friends ) to deep throat triple classy loud (UK Bond style).

Fantastic offer Peter.

[Wolf]

Yes it would go in at the inlet and we could tailor it to reduce as much as wanted - ours drops about 8 db for comparison

[Werks]

Hi Peter,

In anticipation of your generous offer, I removed my D&D's last week

After dinner, I'll take the inlet measurement so no one else has to remove their exhaust.

If you need someone to do extensive testing of the prototype baffle, I gladly offer my services

You da man ! ... Tom

Aussie Sprint wrote ....The D&Ds need to go from 'American obnoxious loud' (standing by to be flamed by my US friends )

I checked around and you no longer have any American friends

[Billbikes]

It would have to be a shorter baffle than you used in your pipes, as there is a bend shortly after the inlet, not as straight as yours....


Sent from my iPhone using Motorcycle.com App

[DaveM]

Originally Posted by Billbikes

It would have to be a shorter baffle than you used in your pipes, as there is a bend shortly after the inlet, not as straight as yours....


Sent from my iPhone using Motorcycle.com App

Kinky pipes eh Bill

[Werks]

Peter,

... I measured the inlet ID at 1.875" ( See pic 1)

Billbikes wrote...It would have to be a shorter baffle than you used in your pipes, as there is a bend shortly after the inlet, not as straight as yours.

... See pic 2


If Trident used a mounting bracket like this ... I'd have a Trident

[Aussie Sprint]

Thanks for the measurements Tom. I was hoping your pipes were still off the bike.

[Werks]

Thanks for the measurements Tom. I was hoping your pipes were still off the bike.

Glad to be of assistance.

I've enjoyed the D&D's these past 3 years or so, and have also become an earplug expert in the process

I must admit however that I'm growing weary of loud cans, and find my newly rediscovered stock can a refreshing change.

It actually sounds pretty good ... for now

Tom