Triumphrat

sanscrainte · 08-31-2007, 02:13 PM

I have an 07 model and ordered Pazzo Levers from Motomummy.com. I just received my levers in the mail and put the clutch on no problem. When I went to put the Brake lever on it was a no go. The lever wouldn't even slide into the housing of the brake. It is about an 1/8 to 1/4 inch to thick. I compared the stock to the pazzo and they are not the same design. The striking on the bottom of the lever is F-35.

If anyone has the short brake lever for their Triple could you tell me what their lever has struck on the bottom of it. I e-mailed motomummy, but I would like to have the number of the correct lever if I have to dispute it.

Thanks in advanced

harleyxlc · 08-31-2007, 02:30 PM

If you don't get an answer sooner, I'll go out at lunch and check.

dblhelx · 08-31-2007, 03:31 PM

I have the long Pazzo brake lever. I'll check before I come back to work after my lunch brake. I just instaleld them last night.

sanscrainte · 08-31-2007, 03:39 PM

I appreciate you guys looking. I would have both mine on also but I guess luck wouldn't have it.

I have received an email back from Motomummy asking me to ship the part back. They have been very nice so far.

harleyxlc · 08-31-2007, 04:33 PM

I tried to look...there is a tiny number near the mount but with the sun behind it, I can't read it.

I will try again when I get home and it's in the garage.

But it did give me the chance to see that the two little drips of oil under the bike are now a big oil stain...

harleyxlc · 08-31-2007, 08:07 PM

F-14 and no my message isn't too short.

sanscrainte · 08-31-2007, 10:16 PM

I mailed my brake lever back...They said they will get the correct one to me.

sanscrainte · 09-01-2007, 03:00 AM

where you leaking oil from, Harley?

harleyxlc · 09-01-2007, 10:54 AM

Hey, thanks for asking. My oil is a whole different matter...but the bike....

It turns out that cleaning your bike might be a good thing (although I haven't in the past 10 years so why start...).

It was coolant running down the filthy bike parts and hitting the ground. I took the bike to work, which I never do as I have another bike for boring commutes. With our heat and the stop and go, it was much hotter than normal, hence the coolant spit.

sanscrainte · 09-09-2007, 02:42 PM

got the correct lever in the mail yesterday...

Even though I didn't get the correct one the first time. I will have to say that the original order and delivery where quick. They were nothing but nice and apologetic on the mishap. They were quick with correcting their error and the part got here faster than I thought it would. I will probably me using motomummy.com again.