Installing Mad Doctor kit

[Spooner]

Hmm..don't know if I'm ignorant but looking at the wiring diagram I don't get how this thing comes together. Italians aren't joking when they translate into English...

Does anyone have the ABC 123 version handy?

[jimmie]

It's alot easier if you don't look at those instructions. I did mine and I'm no wiring wiz fershur. I away from home this week or I'd try to shoot you a pic.

I installed mine last week and everything worked from the beginning.

First of all you have to cut the mysterious brown jumper cause your turn lights need 10Watts. When you unplug the plugs to the rear light, the turn lights and the plate light you see a few marked cable pairs. The red pair is the right turn, the black pair goes to the left turn and the yellow one is the plate light. I don´t remember which color was the stop and which was the position light but you can try that out, just remember:

Always connect the black cables to the black cables (common/negative battery) and the colored to the colored (supply voltage).

If that´s not enough information, I can look at the exact colors of the single cables tomorrow and make a foto. :wink:

[Spooner]

On 2007-06-05 16:38, Laplace wrote:
I installed mine last week and everything worked from the beginning.

First of all you have to cut the mysterious brown jumper cause your turn lights need 10Watts. When you unplug the plugs to the rear light, the turn lights and the plate light you see a few marked cable pairs. The red pair is the right turn, the black pair goes to the left turn and the yellow one is the plate light. I don´t remember which color was the stop and which was the position light but you can try that out, just remember:

Always connect the black cables to the black cables (common/negative battery) and the colored to the colored (supply voltage).

If that´s not enough information, I can look at the exact colors of the single cables tomorrow and make a foto. :wink:

Thanks! Did you not use the connectors that were fitted to the cables? A photo would be fantastic!

[MrZed]

On 2007-06-05 16:38, Laplace wrote:
I installed mine last week and everything worked from the beginning.

First of all you have to cut the mysterious brown jumper cause your turn lights need 10Watts. When you unplug the plugs to the rear light, the turn lights and the plate light you see a few marked cable pairs. The red pair is the right turn, the black pair goes to the left turn and the yellow one is the plate light. I don´t remember which color was the stop and which was the position light but you can try that out, just remember:

Always connect the black cables to the black cables (common/negative battery) and the colored to the colored (supply voltage).

If that´s not enough information, I can look at the exact colors of the single cables tomorrow and make a foto. :wink:

Some more:

http://www.triumphrat.net/modules.ph...40946&forum=19

Did not use the supplied connectors.

[cyclerider105]

I agree, the directions suck! Nice kit though and I am happy with mine. It will look good when you are done!

Good luck!

[Spooner]

Got it! Thanks for all the help guys! :upthumb:

[Mesoam]

don't suppose you drive a volvo being from stockholm?

[Spooner]

On 2007-06-06 18:23, Mesoam wrote:
don't suppose you drive a volvo being from stockholm?

The S3 ´07 is just drop-dead-cool with the MadDoctor Kit and a short exhaust (Arrow, Zard...). I just love it every time I look at it... :tongue: