Anyone else with clutch and stand cut-out switch issues?

[elpirtdeeps]

I seem to be having intermittant starting problems. Happened a couple of times now. Seems to be either the clutch or side stand cut-out switches as I eventually got her started after fiddling with the switches.

Anyone else had similar issues or had to replace either switch?

[tekmoe]

had a problem with the clutch switch early on. one day when i was at the gas station the bike would not start back up. i beat the clutch lever with my fist and i have never had a problem since.

[BUCKET]

My bike will only start with the clutch lever about 10mm out from the handgrip,try starting it with your lever in different positions.Should get it replaced while it's still under warranty i guess but the closest dealer is well lets say,--------------------. :-D :hammer:

[elpirtdeeps]

On 2007-02-07 23:48, BUCKET wrote:
My bike will only start with the clutch lever about 10mm out from the handgrip,try starting it with your lever in different positions.Should get it replaced while it's still under warranty i guess but the closest dealer is well lets say,--------------------. :-D :hammer:

Thanks for the tip Bucket. Yeh I want to get it fixed before the warranty rund out too...

[Joemomma]

Mine will only start with the clutch in the "right" position...soon as it's not -5F with a few feet of snow I'll get it to the dealer. I would guess it's a vendor issue with the clutch switch, seems to be more failures than I would normally expect.