Motomfg Bike Lift / Paddock Stand Group Buy (Now Extended through Dec 25)

[cotriumph]

Wow..talk about perfect timing. I'm in for a stand with wheels.

Thanks for setting up this deal DEcosse!

[DEcosse]

Good man! We're at quota now
But will still remain open through the month

I've sent PM to all committed participants on the list - please respond ASAP with the requested info.

[mrandoms]

In for one with wheels for a 2010 street triple r

[DEcosse]

Thanks! - added to list! look for PM

[DEcosse]

The Motomfg site is being updated so the orders can be processed automatically with discount code. You should be able to place these tomorrow (Friday) once I forward that to all of you on the list.

Still looking for few more just in case we get any drop-outs!

[FoothillRyder]

Since they don't show Speed Triple product on their web site, will we be getting either a different part number to order, or a link to a product/page from which to order?

[DEcosse]

See note immediately above Ron - site will be updated by tomorrow.
I'll send instructions/link with the code.

[Afrog]

Apologies, just seeing the paddock stand GB info and am wondering if this will fit an 02 Daytona CE (SSSA), and what modifications would be required, if any. What would make this even more awesome is if it would work with both my Daytona and my wife's 07 'Zuki GSXR 600. I know, probably far-fetched, but would make this beyond valuable to me. Thanks in advance for the assistance!

So, after actually being able to get to the MotoMFG website through the firewall, I'm seeing it should be plug-n-play for the '02 Daytona...I guess my concern is if it plays nicely with the fairings in place, or if removal would be required (like with the Triumph front wheel stand). I also see that they have it for the GSXRs...so, how much is now the question to get set up with both? It also seems that I'd have to swap out the pins and plate to change which bike was on the stand.

LOL...and now more disappointment, they don't support the 2007 Suzuki GSXRs...at least yet.

Frog

[DEcosse]

they don't support the 2007 Suzuki GSXRs...at least yet....

The 07 GSXR 600 & 750 should be the same ?????
The frame is identical so the listed 750 fitment should also be the same. - http://www.motomfg.com/MotoMfg_paddo...uki_p/ps-5.htm

..... I guess my concern is if it plays nicely with the fairings in place, or if removal would be required ....

I would believe it should work fine on the Daytona without removing the fairings - the base is extremely low profile and it lifts directly from the frame (see the pictures of mine above)

As long as your swing-arm spindle is the 17mm hex on left side, (and it should, having checked pictures of CE mode) will be fine.

[Jeremy J]

Originally Posted by DEcosse

Greg at Motomfg kindly sent mine on ahead of the full commitment to get a confirmation on fitment for the earlier models.


Here's a wide-view so you can see how tight the bike now tucks into that space:

Damn you for showing me this. I think I am going to have to get the dang wheels too. I found a nice place for me to tuck my bike that gives me more room to work on my car.