S3 -05, display restart

It should all still be under warranty, I would just take it back and let the dealership handle it.

[drainbamage]

On 2005-05-26 20:22, riceburner wrote:
My display clock keeps resetting to "1:00"
and my trip odometers stay at zero. My dealer does not know what to make of it, but it looks like a replacement display will be necessary.....

Exact same problem here!

[MrZed]

Just picked up my Triple yesterday - last night it did the same thing (stopping & restarting fixed it right away), but today after work (rained a bit) it did it the whole way home.

[hatchet]

After I got mine replaced at around 2000kms the problem completly disappeared. As a temporary measure while I still had the bad one, I just removed and replaced the fuse (number 5 I think, top right) and it would work again for a few days.

The dealer had seen a few returns out of the 20-30 he had sold.

Now I have to take my bike back again for the hose recall thing. Not too impressed with Triumph so far (did I mention that the seat removal cable broke? I need to open it with a long screwdriver now)

Got my new triple today and clock keeps going back to 1.00 also, mechanic looking into it. Also anyone know how to change speedo from mph to kph display ?

[Martin_R]

On 2005-10-04 05:36, kiwitriple wrote:
Got my new triple today and clock keeps going back to 1.00 also, mechanic looking into it. Also anyone know how to change speedo from mph to kph display ?

Eldercanuck on another display thread: "I found the solution accidentally. With the ignition (but not the engine) on, press and hold down ALL 3 buttons for 4 seconds. At this point, the speedometer reading will start flashing a single digit number - usually 2. Using the scroll button, that number cycles between 1 and 3, with 1=kph, 2=mph and 3=mph as well. Pressing "set" sets the desired mode."

If I remember correctly the difference between 2/3 was English/US units for the gas mileage display.

As far as the display resetting goes: get a new display unit on warranty. At least I did and have had no problems since.

[ This message was edited by: Martin_R on 2005-10-04 06:03 ]