Triumphrat

Shel

Hi all, I'm building a 74 Trident cafe bike and I have the left handle bar switch that I believe came off a mid nineties Sprint. I am hoping one of you folks can help with wiring color codes, what goes where?
The connector is laid out like this
1 green 6 red w/yellow stripe
2 orange 7 red w/black stripe
3 gray 8 black w/yellow stripe
4 black w/white strip 10 blue
5 black 11 black w/red stripe
12 brown
there is also a short pig tail that comes from the main harness about mid way. it has three wires black w/yellow stripe, black w/red stripe and a black wire.
Any help is greatly appreciated.
Sheldon

IrlMike

The 90s Sprints used the same handelbar switches as all the 885 triples I think. Bottom left of wiring diagram shows the left hand switch.

Mike

Attached Thumbnails

 

__________________
Legend chassis, Tbird tank/seat, Sprint fairing, tubeless wheels, Thunderbike 3-1, air box mods, 115/40 jets, DJ needles, Ignitech with TPS, ZX6R shock, ZX7R USD forks/yokes, Alcon 6 pot

Shel

Thanks Mike, that's just what I needed.
Sheldon