First off a few rules:

1. Only post pics of your bike here (nobody elses), and a quick run down of the mods you made.

2. You must have changed more than 3 major items jets, air filters, tires, mirrors etc dont count - examples would be wheels, seat, header pipes, paint etc.

3. Your mods shoudl result in a significantly non-stock look

4. I reserve the right to delete any that I consider don't meet the standard above- currently I only know of a handful of bikes that woudl fit these requirements.

OK first off I will start with mine:



Mods:
<UL><LI>Cutom rear fender / plate mount.<LI>Monster rear light<LI>Daytona indicators with clear lenses<LI>TBS solo seat<LI>TBS headers and TOR mufflers<LI>TBS rear subframe<LI>TBS rear shock<LI>Kawasaki ZRX1200R Wheels, front forks and front brake<LI>Trophy rear caliper, ZRX1200R rear rotor<LI>TBS rearsets with modified Daytona pegs, gearshift linkage converted to restore normal shift pattern.<LI>Daytona 600 horn<LI>Mecatwin airbox covers<LI>TBS centerstand<LI>Monza flip top fuel cap<LI>Flanders bars<LI>Speed 3 guages<LI>Daytona bar grips<LI>CRG billet mirrors<LI>TBS front mudguard - modified to fit ZRX forks<LI>GSXR750 radial brake master cylinder<LI>Kawasaki Zx7r clutch master cylinder<LI>Stock headlight mounts painted black<LI>Sprint steering damper<LI>TBS side covers and keylocked seat<LI>Kawasaki black adjustable levers<LI>Adventurer kneepads<LI>TBS kickstand<LI>Kawasaki ZRX1100 vacuum petcock (modified)[/list]

__________________
Mick...

My '98 Thunderbird Adventure Sport Speed Tourer


I have not had it out for a good photo shoot.

• Speed Triple Gauges
• Omar's Bikini Fairing (modified)
• Custom made front turn signal mounting bracket
• Eliminated rear turn signal stalks
• Custom made headlight mounting tubes (fork tube covers)
  • Effectifely moves the headlight up about 1 1/4 inch in order to get the fairing to line up the way I wanted.
• D&D exhaust from 2000 and newer TBS
  • Required custom mounting bracket
• '02 TBird Rear Fender
  • I never liked that License light on the original fender.
• '96 Adventurer headlight bucket
  • Allows more clearance for the speedo cable to stop the bouncing needle, necessary when moving the headlight upward
• Thunderbird Tank Badges
• And of course that wonderful paint job.
  • The paint was done by none other than our own Hinckley. O and if you want a paint job by him, you must let him ride your bike through a puddle of spilled oil on Happy Valley Road during a rainstorm first.
• Triumph accessory Cowl seat for usual riding.
• Triumph accessory Passenger peg removal kit.
• Rick Mayer Touring seat for long distance rides.
• Ventura Rack System, Kinda Ugly, but very Functional.
• Starcom Communications system
• Permanant Dual Controller for Gerbings Heated Gear

More to come. Looks like some little improvements to the brakes are next since the original rotors are almost worn out.

__________________
Cheers,Denny

ZZR1200 wheels
ZZR1200 rear brake disc and sprocket
ZRX1200 front end with gold valves and racetech springs
ZRX1200 front brake discs with 6-pot Tokico calipers
ZRX1200 front brake M/C
ZZR1100 black clutch and brake levers
TBS rear shock
TBS rearsets
TBS solo seat
Trophy rear brake
Highway Hawk Bologna mirrors
Lucas handlebars
Meca Twin undertray and rear light
Custom made 3 into 1 exhaust with Supertrapp pipe

[ This message was edited by: Spooner on 2007-05-11 06:58 ]

__________________
S.P.O.O.N.E.R.

Huh?



Speedy MattHilda & Thunderasaki

Well, the older pics of the metamorphosis of my Legend are in my album.

Prior to the current strip down, I had:

TBS Complete front end.
Meriden UK Spec Bonneville handlebars.
Thunderbird Tank.
TBS faux air filters ( covers)
Meriden 'Trident' logo on sidepanel
Converted Campbell Raygun silencers on Tiger downpipes.
'69 BSA / Triumph alloy rear lamp.

Things are in big lumps at the moment, with a view to including.

Trophy air box, pistons & cams.
Daytona Igniter box.
Braced Legend rear sub-frame.
Trident swing arm
TBS Rear suspension unit.

I just love the modular T3s....They are a 'Build Yourself A Bike U Like' Kit!

Is this enough to qualify? :wink:

Nige :-D

[ This message was edited by: Ballacraine on 2007-05-11 08:50 ]

__________________
In faecorum semper solum profundum variat.

(Always in the s**t it is only the depth that varies)

Nige's Gallery

1999 Triumph Legend
<UL>
<LI>Kawasaki ZX-12R USD front forks
<LI>Nissin 6-pot brake caliper
<LI>Ducati Monster front fender
<LI>Custom top triple clamp
<LI>Fatbar MX-style handlebar
<LI>'99 Tiger brake MC
<LI>Mapam billet mirrors
<LI>Aftermarket grips
<LI>Aftermarket headlight brackets
<LI>New horn / 'bell' cover removed
<LI>Smaller 'bullet' turn signals
<LI>Cat eye LED taillight
<LI>Home-made rear fender eliminator
<LI>Heated grips
<LI>Custom chopped T-bird Seat, re-covered by Sargent
<LI>Custom 3-1 exhaust (from eBay via Johnny C the Great Scot )
<LI>K&N pod filters
<LI>Factory Pro jets & needles
<LI>T509 cams[/list]

__________________
~Crosstie

'99 Speed Legend Retro Cafe Streetfighter

Although not yet finished I hope it makes the cut
So Far:
*1200ZZR Rims, forks, Front brakes.
*TBS seat
*Homemade rear fender and fender brackets
*lucas tail light
*Speed 3 gauges
* black superbike bars
* Bar end mirrors Zx11 Levers
*95 Tiger rear caliper 12ZZR rotor
*homemade saddlebag brackets
There are a pile of other mods that are in the works, mainly a front fender.

[ This message was edited by: zs-cafe on 2007-05-29 19:10 ]

2003 TBS
Not as extravagant as the others but just as COOL lookin'

For the guy on a budget:

Epco Stainless exhaust
TBS Single seat/cowl
Custom fender eliminator/plate holder
new signals front and rear
LED Brake light
Monza gas cap
modified stock mirrors to bar ends
Tank pads, knee and top
Fork protectors

__________________
Sometimes it takes a whole tankful of fuel before you can think straight

My Photo Album

Thanks to MICK for this thread.
I'm very pleased to introduce KARMA STARLET PUMPKIN, my Cappuccino Racer:



Her DYNORUN gave 82,4HP (84 with opened mufflers).



Mods:

- Custom tail and rear fender
- Custom seat on a CB400Four base (filled with MemoryFoam)
- LockHart Philips Fairing
- Raask/Tnk Hybrid footpegs
- Chrome mirrors
- Red-Blue instruments lights
- GIVI luggages adapter (underseat)
- Straightened handlebar with supergrip handles
- Fork hoses
- HyperPro (sweden) forksprings - 1 cm fork raising
- Hagon Monoshock
- Steel front brake hose
- GSX-7 Master Cylinder
- TBS Engine (6 Gears)
- SPRINT Cams
- Kehin CVK Carbs of TBS
- Heavy opened Airbox, 125 Main Jets, 42 pilots
- Supertrapp Mufflers

See My album for tech images

Tnkx, bye.


[ This message was edited by: Regiz on 2007-06-04 07:34 ]

__________________
...............- hang on -..............

View Regiz Album

Here is my TBS with Daytona forks, front fender, wheels, clutch and brake master cylinders and brake and clutch levers, also Progressive fork springs all adding up to an amazing difference in handing. Bagster seat, the best seat I've ever used. Predator exhaust, great sound, not too loud but a little deeper. Lots of other minor stuff like chopped rear fender, satin black tank, L.E.D. indicators and rear tail light. Stainless steel drag bars. Billet aluminium pegs. Scottoiler. National Cycle fly screen. GenMar risers and finally black mirrors from Sprint Manufacturing

Mods: Legend Slash Cut TORs, solo seat, fender delete, LED brake light, low-profile turn signals, Napoleon mirrors, black and silver tank with appropriate badge, black side covers, drilled airbox, rejetted ...

More pictures in my album:
http://www.triumphrat.net/memberalbu...ry.php/cat/519

P.S. Bike is for sale. PM for details.