» Sponsors
Motorcycle.com

» Sponsors

Please Visit our Site Sponsors

Reply
 
LinkBack Thread Tools Display Modes
Old 03-31-2008   #1 (permalink)
Member
Supersport 400
Favorite Bike: 01 Legend TT
 
Gone Cat's Avatar
 
Join Date: Dec 2007
Location: Chantilly, Virginia
Posts: 99
Other Motorcycle: '74 Yamaha TX500A
Extra Motorcycle: 1965 Honda Sport 50
Do KBC's loosen up?

I just bought a KBC Medium open face. It feels pretty tight even though It should be my size. Do these helmets get a bit looser with time? Will I get used to this? I'm thinking about returning it.
__________________
"To live is so startling it leaves little time for anything else." Emily Dickinson 1830-1886
Gone Cat is offline   Reply With Quote
Sponsored Links
Advertisement
 

Old 03-31-2008   #2 (permalink)
Senior Member
Formula Extreme
 
Join Date: Apr 2007
Posts: 898
Gone Cat - Although I've never had a KBC, every helmet I have had has loosened up in time. Common thought on the matter is that a new helmet ought to be snug - as in shaking the head side to side with no noticable movement of the helmet. If the helmet is not uncomfortably tight, you are probably fitted correctly.
davidc is offline   Reply With Quote
Old 03-31-2008   #3 (permalink)
Senior Member
Supersport 600
Favorite Bike: Thruxton
 
BillTheCat's Avatar
 
Join Date: Jul 2007
Location: Kansas City Missouri
Posts: 173
In the past I sprayed water on the padding and rode until it dried it promoted faster pad break in. If its fitted right there will be some time depending on temperature before the padding conforms. My last Suomy gave me a headache every time I wore it for the first too weeks after that it got better.
__________________
LAND of the FREE ....*some restrictions apply. void where prohibited
BillTheCat is offline   Reply With Quote
Old 04-03-2008   #4 (permalink)
Senior Member
SuperStock
Favorite Bike: '08 Street Triple
 
Join Date: Feb 2008
Posts: 230
Most helmets take about 300 miles of riding to settle in. They usually loosen up about 1/2 size. If by chance you bought one "fitted" to your head (I'm guilty of this as well), there are tricks you can do. If there are no available helmet liners to adjust the size, and the cheek pads are ok but the "crown" of the head becomes too loose (the most common)...remove the liner, cut a 2 or 3" wide strip of jean denim and glue (try superglue) it to inside of helmet liner crown. Let dry. Pow! A new, tighter fitting helmet with liner that is STILL washable and breathable!
Ken M1 is offline   Reply With Quote
Old 04-03-2008   #5 (permalink)
Member
Super Sidecars
Favorite Bike: 2000 TT600
 
Join Date: Apr 2008
Location: MA
Posts: 44
Other Motorcycle: 1997 Katana 600
The worst part for me was how much it pulled on my sideburns. It really hurt for the first week or so then I stopped noticing it. Either it got looser or I got tougher.
__________________
'00 TT600
'87 GN
GNTurbo6 is online now   Reply With Quote
Old 04-04-2008   #6 (permalink)
Member
Supersport 400
Favorite Bike: '07 Black Thruxton
 
Join Date: Jan 2008
Location: Southern NJ
Posts: 89
Other Motorcycle: V-Max
I posted a similar thread regarding Arai helmet sizes, I purchased a large (59-60cm), but was fitting to tight for comfort even though correct size. Anyhow, can't speak for the KBC's, but I ordered a new set of cheek pads (15mm vs 25mm stock) and have put 1 month and 500 miles on my head (Mr Clean haircut), and it is now pretty comfortable, no pressure points to extreme, just nice and snug all around.

So, I'd say put some time into the helmet, if tight around the temples/jaw/cheeks, go with smaller pads if available. If tight through the middle of the head (above the ears), might want to check if model is a round or long oval model, will make a difference depending on your head shape.

Good luck and good riding.

Regards,
P.J.
__________________
You only as old as you want to be
MudTub is offline   Reply With Quote
Old 04-04-2008   #7 (permalink)
Member
Supersport 400
Favorite Bike: '07 Black Thruxton
 
Join Date: Jan 2008
Location: Southern NJ
Posts: 89
Other Motorcycle: V-Max
My Bad, can't read properly this time of night, open face helmet vs my full face, sorry!

Quote:
Originally Posted by MudTub View Post
I posted a similar thread regarding Arai helmet sizes, I purchased a large (59-60cm), but was fitting to tight for comfort even though correct size. Anyhow, can't speak for the KBC's, but I ordered a new set of cheek pads (15mm vs 25mm stock) and have put 1 month and 500 miles on my head (Mr Clean haircut), and it is now pretty comfortable, no pressure points to extreme, just nice and snug all around.

So, I'd say put some time into the helmet, if tight around the temples/jaw/cheeks, go with smaller pads if available. If tight through the middle of the head (above the ears), might want to check if model is a round or long oval model, will make a difference depending on your head shape.

Good luck and good riding.

Regards,
P.J.
__________________
You only as old as you want to be
MudTub is offline   Reply With Quote
Reply




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On


Motorcycle News, Videos and Reviews
Harley Davidson Suzuki GSXR Honda 600RR Yamaha R6
Sportbike Forums GSXR Forum Honda 1000RR Yamaha R1
Sportbikes Forum Ducati Forum Kawasaki ZX R6 Forum
Motorcycle Forum Ducati Monster Kawasaki Forum R1 MessageNet

Powered by vBulletin® Version 3.6.10
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.1.0