Triumphrat

Subzero

Hi,

I'd like to change my bar ens, foot pegs, hand grips and mirrors on my bike. And I was wondering if anyone nows if parts of other make are interchangeble with a Daytona 04?

Subzero

Can't wait for the snow to melt!!

stealthy1

Other than the post in the stickies at the top, I won't be any help. I might take the throttle side mirror off your hands though, if you still have it and are looking to sell. You can pm with info.

CYLax

If you search around there's quite a bit of info on this site an others about interchangable parts. Most of my experience is with swapping parts between a T595 and an '02 955i...mostly cause I break stuff.

For foot pegs...Oberon makes a couple nice pegs specifically for the Daytona, they run about $80 a set. Otherwise you could take regular ole' lockhart phillips footpeg and shim it to fit the Daytona rearsets. If I were you...I'd spend the cash on the Oberon pegs, I'm thinking of doing the same.

Hand grips are pretty universal. Find what you like, buy them, install them. I'll be putting Driven grips on my 955 tomorrow when the mailman drops them off. I run ProGrips on my track bike and they're ok...much better on the street I would imagine. I've heard good things about Renthals too...any local dealership should have plenty of options for you.

Mirrors are a tough one. I've heard of guys having a lot of success with the K4 GSXR mirrors and the Honda Fireblade mirrors. It's not a direct bold on...some modification is required, but I can't give you specifics as I have not done the mod myself. A number of guys on T595.net have done mirror mods from various non-Triumph models...most of them post pics, just do a search.

As for other parts...I could probably blab on for a while...what all are you thinking of doing?

Sprocketjockey

Measure hole centers to be sure, but I used passenger pegs & brackets from a GSXR...$15 on eBay.

__________________

Subzero

thanks for the info everyone...i'll take a look at every thing when I dig my bike out of the snow