Triumphrat

streetsailor · 04-18-2007

Does anyone know a good spot to relocate the regulator and the horn?

I've read threads were people have mounted their horn under the tank. How'd you do that?

And Thruxton-up has mounted his regulator someplace else. I just couldn't figure out on the pics where that spot is...

Thanx for the help
Streetsailor

Thrux-ton-up · 04-18-2007

My regulator is mounted on the Airbox eliminator unit at the bottom but in front so it is protected from water/rocks etc, but its still wide open around it for cooling. The horn mounts using the stock bracket to 1 of the holes left over from the AI mount - just angle it to fit above the cam cover. The stocker gets really weak under the tank so I have replaced mine with 1 of those 125 decibel jobs and faced it down /forward to hear it better.

Heres the regulator mounted above the swingarm looking in from where the right side cover would be.

Mancha · 04-18-2007

See the following thread for horn relocation info and pics:

Horn relocation thread

Thrux-ton-up: Good idea re the regulator. I'm tempted to do that, although it must have been a hassle pulling the wires.

Thrux-ton-up · 04-18-2007

Me and the "prince of darkness" at work!!

Mancha · 04-18-2007

Yeah, no way am I getting into THAT! :-D

tcb · 04-18-2007

I mounted my regulator vertically on the front of the frame just above the oil cooler location. Works great!

TCL · 04-18-2007

+1 with TCB. I put my horn under my tank, my ignition switch in the right side panel, and my regulator on the front. I had to make the hole tiny bit bigger, but the bike runs great. Oh yeah, and that's a Thruxton light bracket on my Bonnie.

[ This message was edited by: TCL on 2007-04-18 21:10 ]