Triumphrat

06-28-2005

Here are some pics of my 69 bonnie which was unfortunately chopped way back in the day. I'm going to do my best to get it running and riding so I can have a cool bike to ride up&down main street in my town.

Here's the nice new gasket set, mikuni carbs, and throttle cable that came with the bike.

This is where the points are, right? I don't know what I'm looking at here, has it been converted to distributor or not?

after doing some reading, I found that I've got a boyer box, mity max, and accel supercoil (not pictured) with the bike! That's why I ask about the distributor, maybe it's been converted and I just have to wire it up.

Here's the big picture.

QUESTIONS: Okay, the motor's put together, now I have to take care of spark. It looks like I've got my mity max and boyer box, what else electrically do I need? (lights excluded.)

Do I have points or a distributor right now?

What do you think of the green?! :-)

hobbit · 06-28-2005

You have a boyer, the same as me. The gear in the points cubbyhole is the sender unit, the wires from here go to two of the connections on the black box - black/white & black/yellow. The other connections on the box are : black -ve term coil 2, red +ve term coil 1, white earth. The other connection needed is a bridge from -ve coil 1 to +ve coil 2. The sender replaces the points, there is no distributor.

06-28-2005

I understand! that's great. Now all I gots is fluids and I should be able to put her together!

[ This message was edited by: maireeka on 2005-06-28 12:25 ]