|
I think they would work as you describe. There are 3 wires going into the headlight IIRC, ground, + for low beam, and + for high beam.
If you ran the ground to each light, and a + to each light (one low, one high) I don't see why it wouldn't work.
The difficult part, and I just went through this, is relocating all the wires that used to live inside the headlight. I kind of tried to cut and reroute/retape as much as I could, and I ended up pretty much stuffing and zip-tying it wherever I could cram it. The tank hides most of it.
Last edited by sweatmachine : 03-24-2008 at 11:12 PM.
|
