|
Griff,
Upper 70's and sunshine all week!!!!!!
Sounds like your in good shape with the engine rebuild. Make sure you check the oil preasure relief valve while you have the sump off. It's a brass fitting looking thing with a little ball in the middle. Screw it out and make sure you don't have any nasty gunk in/under it. Sounds like the preasure build up could push the coolant out, especially with the liners not sealed. But I would still double check the cap, thermostat, temp sending unit, fan temp switch, and fan just too be sure.
Happy Wrenching!!
Erv
Deep in the Heart of Texas!!
__________________
"Life is tough, but it's tougher when your STUPID!" John Wayne
|
