Quote:
Originally Posted by rockt3
If you have gone from a standard lamp to a LED you have to wire in a load equalizer( resistor ) ....
|
No you don't if you get the correct Electronic FLasher Module; these are available for < $20 and plug n play versus having to splice in resistors, which then get hot.
Also, I'm not fond of the suggestion to re-wire the bike's connections to fit the wrong part - down the road that undocumented change to stock wiring is going to cause someone problems. Just get the correct part to begin with!
Get the CF13GL-02 variable load relay from superbrightleds.com
