Ok, due to suffering a "spontaneous pnuemothorax" over the last few weeks, I've been more/less bound to the lay-z-boy with the laptop. It's given me time to reflect even more on things to do on my 99 Sprint ST. I wanted to be on the safe side and go ahead and replace all the bearings, but, I just couldn't find anywhere that had a list of the bearing part numbers I needed.
What I've discovered is that through much surfing between pain-med induced naps, reveals nothing as far as a good reference for bearings; good info spread about through posts, but, very spaced out.
So, maybe if I do this well enough, possibly a sticky might could be added for such a thing?
I KNOW I've missed a lot, and might be completely wrong on some, so, I'm asking you guys to help me "fill in the blanks" so to say, and I'll just edit the post to maybe help out others in the future
Here's what I have so far on a 99 Sprint ST (and probably on many other models and years as well):
Head Bearings:
Howto -
http://www.triumphrat.net/sprint-forum/39391-adjusting-steering-head.html
Top- *NOTE* Read Stlakid's post in the above thread about which one of the top head bearings you wish to use
Description: Ball Bearing
Universal Part#: 6205-RS
Dimensions: 25x52x15
OR
Description: Angular Ball Bearing
Universal Part#: 7205B
Dimensions: 25x52x15
OR
Description: Taper Wheel Bearing
Universal Part#: 30205
Dimensions: 25x52x16.5
Bottom-
Description: Taper Roller Bearing
Universal Part#:
n/a
Dimensions:
n/a
Front Wheel Bearings: 2 bearings, same part#
Description: Ball Bearing
Universal Part#: 6005-2RS
Dimensions: 25x47x12
Rear Wheel Bearings: 3 different bearings; 2 different roller and 1 needle
_
| Description: Ball Bearing (requires 2 of these)
| Universal Part#: 6908-2RS
| Dimensions: 40x62x12
|
| OR
|
| Description: Twin Ball Bearing (requires only 1 of these)
| Universal Part#: n/a
|_Dimensions: 40x62x24
Description: Twin Ball Bearing
Universal Part#:
n/a
Dimensions: 35x55x20
Description: Needle Roller Bearing
Universal Part#:
n/a
Dimensions: 45x55x20
