|
Hope this helps, i have listed a lot of the more common torque settings for the Efi Tigers.
Pad retaining pins Front 18 nm/13.25 ftlb Rear 28 nm/20ftlb
Caliper mounting bolts 28 nm/20.6 ftlb
Brake hose banjo bolts 28 nm/20.6ftlb
Front disc(rotor) bolts 22 nm/16.23 ftlb
Rear disc(rotor) bolts 25 nm/18.45 ftlb
Bleed nipples 7nm/ 5.16 ftlb
Front axle bolt 60 nm/ 44.28 ftlb
Rear axle bolt 85 nm/62.73 ftlb
Engine Mounting bolts (Bracket to cylinder head) 30 nm/22.14 ftlb
All other mounting bolts 90 nm/66.42 ftlb
Spark plug caps 10 nm/7.38 ftlb
Valve cover bolts 10 nm/7.38 ftlb
Thermostat cover bolts 7 nm/5.16 ftlb
Radiator mounting bolts 9nm/6.64 ftlb
Silencer and downpipe exhaust bolts 22nm/16.23 ftlb
Rear footrest bolts 42 nm/30.99 ftlb
Brake pedal pivot bolt 27 nm/19.92 ftlb
Handlebar clamp bolts 35 nm/25.83 ft/lb
Steering stem nut 65 nm/47.97 ftlb
Rear Shock absorber mount (upper) 95 nm/70.11 ftlb
Rear Shock absorber mount (lower) 48 nm/35.45 ftlb
Swingarm pivot bolt 88 nm/64.4 ftlb
Front drive sprocket nut 132 nm/97.4 ftlb
Rear drive sprocket nut 85 nm/64.4 ftlb
Hope this helps, i'll leave this at the top as a sticky post
[ This message was edited by: BigStripey on 2004-12-17 13:44 ]
__________________
Big Stripey
I am but mad north-north-west: when the wind is southerly I know a hawk from a handsaw
|
