hello there fellas
i was wondering if anyone out there has run into the same problem as i have at the moment?
i have a 2006 675 at my shop for a 12000 mile service inc valve adjustment,it is stock except for a jardine slip on pipe and my customer had a tuneboy tune downloaded to run no o2 sensor and it has the fuel pump relay update done by another dealer
after doing the service with no problems the bike now runs fine but puts a unknown fault code p1105 in the ecm,when i clear the code it has a poor idle and cuts out intermitantly.after a minute or so the code returns and the bike runs great again!! in other words it runs good with a fault code in the box]
i have the triumph fuel pressure tester hooked up and its the first time on a 675, the needle seems to flutter at idle more so than when hooked up to earlier speed triples inc 1050's,rockets,sprints,
i see there is a new fuel pump on this model and wondering if any of you guys have run into a similar problem or any issues with the relay update?
thanks a lot
adrian
www.adepackett.com
