|
pilot circuit still clogged
I am very sure that the pilot circuit is still clogged. after the rust did you use Kreem in the tank if not, if there is any tank rusting you will have problems from now on. you really need to detail strip the carbs. and clean the pilot circuit carefully, go to the welding shop and get a torch tip cleaner for the small holes and lots of cleaner and compressed air, take your time and really clean everything from both ends, flush with cleaner blow out repeat several times in both directions. this includes all the small holes in the emulsion tubes etc. also sometimes after a rust problem the needle, emulsion tube,and main get worn and cause problems.
__________________
"Peter, It seems like you have been missing a lot of work recently, well Bob I wouldn't say that I've been missing it"
ENOUGH, go out and ride!
|
