|
If you're at all mechanically inclined the valves are pretty straightforward, I did mine in an afternoon. It does help to have a second set of hands to hold stuff out of the way at times. I ad one valve that was borderline tight, the rest were spot on.
You can buy/make the Triumph tool (I made one) but I think it's just as easy to pop the cam caps off and remove the shims that way.
Buy the manual and dive in, it's fun.
Matt
__________________
The point of the journey is not to arrive
Neil Peart
|
_2.gif&contenttype=gif "SportbikeTrackGear")
