|
It's called a "D" tool...Newbonneville.com sells em and probably other vendors. You can make one for temp use by using a piece of small copper tubing and shaping it with pliers, or you can make a more permanent one with a few hand tools and patience. Mine doesn't take a "D" tool--too old--but if it did, I would probably just order one and spend my time riding. :-D
Larry
__________________
Larry
2003 T-100 (790cc), NARK, NH Togas, 8100 rpm rev limiter, 158 main jets, 42 pilot jets (less than 1 turn out on pilot screws), stock needles--no shims. 13 A/F ratio from 1100 rpm to 4000 rpm; 12 A/F ratio from 4000 rpm to 6000 rpm; 13 A/F from 6000 rpm to 8100 rpm.:D
2007 Tiger 1050--White:D--SW-Motech crashbars, Skidmarx rear hugger/chain guard, Calsci +7 windscreen.
|
