|
The light I used is a standard type lucas style light. It is NOT an LED unit.
I have no rear fender at all. Its gone. So I didn't ground to the fender. I tried to ground on my homemade tag and tail light bracket. Everything is attached to steel. So i don't need the black ground wires?
let me get this straight...on the tail light I was supposed to do it opposite, right?
Okay, no problem.
Also in front....the aftermarket signal's wires are white/black and black. I soldered the white/black to white on the bike and the black to the black on the bike.
These signals are just like the one's that come with the "new bonnville" kit, except that they are brushed steel instead of chrome. Infact, all the components I used are the standard fare...nothing weird.
Does my front set up sound right? BTW- the horn and relay not working was a blown fuse.
I'll tackle it all again tomorrow. Any further input is most appreciated!!!
-Ben
[ This message was edited by: fastforward on 2007-03-20 23:03 ]
|
