|
I measured the difference in the Thrux and Bonne caps on the underside and cut a piece of schedule 80 pvc that much shorter than the stock steel tube. I started with the aduster all the way out with 9wt oil in the tubes. It took some trial and error riding to find the sweet spot. I have it turned down 1 level on the adjuster with that wt oil and Hagon springs in the forks and Hagon Nitros in the rear. Good luck.
VR6 :hammer:
I weigh about 250 with full gear on.
[ This message was edited by: VR6 on 2007-03-11 20:20 ]
|
