Is that the diode to enable both blinkers to activate the LED idiot light? I finished my wire relocate in prep for my new headlight and halogen small SilverBullet running/turn signals from Kuryakyn.Not being sure how the running/turn module wires in [don`t have it yet]I didn`t try to correct the indicator issue,but will probably just wire an LED in,in series with the blinker in question [right side] so each blinker side will have an indicator. The wiring harness that Triumph employs was pretty simple save for some odd doublebacks,which link vital operations to seemingly extraneous harnesses,ie: the front brake light activation is doubled back to one of the AI connectors.That added an hour of head scratching,taping and untaping and retaping the harness to correct.
Made me wish I had the manual. :-D But,its all done now and cleaned up the front pretty well.
Curiously,the part I dreaded relocating most,turned out to be the quickest and easiest aspect of the whole job,just requiring enlargement of one mounting hole,that being the rectifier,which fits good right between the forks where my horn used to be. :-D
You may have to look thru the mini gauge topics to find the proper diode,but you may check with Loxpump,cuz I think he got it figured out for us.
