securely jack up front, till all weight is off the wheel. remove brake caliper and suspend off handlebars with string or somesuch
remove fastener and slide speedo cable out of its housing, at the front hub. remove all fender bolts, and sort of carefully finesse it out to the rear side. loosen pinch bolt, then the large axle bolt(22mm i think) axle slides out, then carefully roll wheel out, holding, at the hub, a spacer on one side, and the speedo drive on the other, as they will just fall out otherwise. reverse procedure for installation, but put a little clean grease on the axle. no warranties expressed or implied, your results may vary.I suggest getting the book, so you have all the torque figures and whatnot
G
