Quote:
On 2007-03-01 21:46, panthercity wrote:
Use a hex (allen) wrench to remove the headlamp from the shell.
IIRC, a 12mm wrench removes the headlamp shell bolts. The bolts go through the headlamp bracket, a spacer, a rubber damper pad, the shell then a captive nut (with the wire guide) inside the headlight shell.
|
Its a fiddly job and you need a set of torx keys to undo and remove the wire holding bracket and do up the bolts for the screen.
I needed to add some rubber washers for to the screen mounts as they were not in the kit - I used thick rubber tap washers.
