|
1) the link is found by reading a sept '05 threads by Carls and kdlutes.
2) You need alot more than sticking a drill in the muffler. Its not too hard but you need equipment.
3) I had my bike secured on a bike lift.
4) The hole bit is a metal cutting door bit 1 1/8 in size and then you need to cut the back baffle with a 1/4 inch metal cutting bit at least 12 inches long. good pliers and a good electric drill
5) When done I think it sounds great.
Hope this helps
__________________
TOR's, AI removal, Polaris bellmouth, K&N air filter, 118 jets, Hagon progressive fork springs, Progressive 440 HD shocks, sissy bar, summer wind screen, union jack brake resevoir
|
