Is it true that the wiring loom has to be replaced along with the grommet? I had a slight leak that I thought was coming from the gasket around the generator cover as the oil drip pooled up at the bottom. I replaced the gasket & I guess the problem was coming from the rubber grommet. I think I mangled it more replacing the gasket because after getting of the highway this morning on the way to work there was oil all over the generator cover & shift lever that seemed to be coming out of the rubber seal. I am going to go home and look at the micro fische and I hope that answers my question, but if anyone can answer this now it would help me with peace of mind for the rest of the day
Thanks,
Zane
