|
"clutch backed-off" could relate to simply screwing in the cable adjusters so no tension is on cable (upper lever &/or bottom of cable where it enters the trans. housing) to backing-off the adjuster on the clutch rod, or as suggested, backing-off the 3 spring tensioners inside the chain case (but why would you do that?). Get a "parts manual" for all the appropriate part numbers that you may need to correctly order any parts . I used the Kreem product in my tank with success, but I let it "cure" over the winter. Waldridge is a good supplier. Go to Vintage Days in Mansfield in July for the swap meet! Have fun! :hammer:
__________________
...and the Rocket's red glare
The jig is up.
The news is out.
They finally found me!
Styx... (Renegade)
Ride each ride like it may be your Last!
|
