|
OK, I just confirmed this today with the measurements from my original sprocket, my calipers and actually installing them on my rear hub assembly at Cycle Gear.
Bike 2002 RS with a DSSA. Stock rear sprocket is 530-43
GSXR 1000 '01-'02 (with 5 bolt hubs) are a direct replacement. The ONLY mod might be to take the sharp edge off the rear of the center hole as Triumph does. 530 with a 42 is stock 43 and 44 are common replacements. Vortech part # 527
GSXR 600 '01-'02 (with 5 bolt hubs) are a direct swap for anyone wanting to go to a 525 chain size. They are the same sprocket as the GSXR 1000 units above in a 525 chain size. Vortech part # 526.
There is also a GSXR 600/750 sprocket setup for a 520 chain size which is Vortech part # 528, but I did not get a chance to try that one on my hub as they did not have any in stock.
The two I listed are a DIRECT SWAP right out of the box for the DSSA on an RS or Daytona 955i.
[ This message was edited by: Stlakid on 2006-04-22 00:51 ]
|
