|
you need to carefully drill off the heads - they are a countersunk screw. Once yopu have the cover off you will be able to grab hold of the rest of the screw with some locking grips (or similar) and wind them out
I cant remember the exact size off the top of my head but they are metric 4, 5mm at a guess. Get stainless replacements and use a smear of anti seize (copaslip etc) on them - don't get it in the brake fluid though.
[ This message was edited by: MickMaguire on 2006-01-02 09:43 ]
__________________
Mick...
|
