|
I did a nice job taking 2" off the rear signal mounting rods today. It took about an hour. I cut off the threaded end that goes into the plate mount. I cut 2"off the rod. Then I drilled the cut end of the rod 11/32". I tapped it a half inch deep with a 10mm tap. I screwed the recycled threaded end in the shortened rod. Then I reassembled the rear turn signal assembly. It looks great.
I like the narrow rear end now that matches the narrow front end.
__________________
2007 ST 1300
2006 Rocket III
2005 Speedmaster
2004 VTX 1800C
2003 VTX 1800C
|
