|
If U don't want to do the "hammer hit", I took a piece of @1/4 in. flat stock, placed it across the points body, drilled a hole so a bolt could go through to the cam body. (same thread & thickness as cam body bolt, only longer - from hardware store, standard threads) put a bolt above the flat stock & start "screwing" useing one body against the other, it should "pull out" quite niceley with a little "SNAP". :wink:
__________________
...and the Rocket's red glare
The jig is up.
The news is out.
They finally found me!
Styx... (Renegade)
Ride each ride like it may be your Last!
|
