|
Yes, get the adaptor kits, then ...
Take a look at my album, click on the photos. Under one of them are the instructions for mounting these mirrors.
You cut the end of the adaptor off with coping saw, then file smooth with emory board and it will butt right up to your bar end. You use the stock screws.
In other words, the adpators will bolt to the existing bar end internals - So remove nothing other than the stock end caps.
[ This message was edited by: lenswerks on 2005-06-28 19:48 ]
__________________
'03 Ducati 999 MP
'04 Triumph Thruxton
'05 Ducati 749S
'04 Ducati 998S FE
|
