Quote:
Originally Posted by cyclecyborg
please explain ecu downloading/ mapping? what system did you use? where did you pull the program that you installed on ecu? leo said no additional mapping was needed. but it sounds like you noticed a difference with a new mapping of ecu.
|
Leo Vince told me also that no ecu download would be necessary. It ran way too lean once the pipe was installed which explains the severe popping on decel. It took it to the Dealer and for 40 bucks they downloaded one of thier ecu settings (I assume it was the Arrow full system low mount) and it runs perfect now. Probably just lucky it was that simple with the Leo Vince. I've got a friend with the same bike but installed a Two Brothers high mount single slip-on and he had similar problems with some mild popping. The smell of his exhaust was strong also. He had them download once he heard my story and his runs better too now. They charged him 80 bucks (sucker) for some reason. I was told it would cost 25 bucks, but they worked on it for about 40 minutes or so so I feel it was a fair deal. The key is to tell them just to download and you will ride it to see if it's right. The time for them to take it for a test ride is chargeable. So save yourself a few bucks, you know your bike well enough to know if it's running well. If not, then have them run it and figure out if another map is necessary.
If you choose the Leo Vince SBK low mount. Let me know and I'll let you know how the install works using the parts supplied with the pipe. You may even figure it out on your own. Basically the spacers go on the outside of the frame, not the inside as shown.
Good luck, you shouldn't need it though.
