|
As Wingnut mentions, you need to note where the centre of the spring mounts on the kickstart quadrant. After attaching the spring (inner to quadrant, outer to pin on the case, it will require about .5 turn to get it to the position where the quadrant is pointed towards the 5-6 o'clock position. Then you take it 1.25 turns anti-clockwise from there. You may need to push the kickstart shaft in a bit to get the quadrant over the stop "pin/shaft", and this is why it's easier to take the pedal off the shaft and use a shifter.
__________________
Per Ardua Ad Astra
(Through difficulties to the stars)
|
