|
You'll need to tow it unless the shop can plug the ECU into another bike. But I highly doubt it'll tell you anything. Keep in mind it's not going to be able to tell you much of anything until the bike is running. Once again -- the check engine light comes on everytime the ignition is on and the bike is not running. So don't be surprised if there is not a code on there at all.
Check the push on connectors on the coils under the right side of the gas tank. I would also siphon the gas out replace and put a product similar to Heet in it and let it sit for a few hours.
__________________
There is no replacement for displacement.
|
