Quote:
Originally Posted by jimmyj900
Excellent!!!!  |
Thank you Jim, your knowledge about Triumph is impressive.
I mounted the nology coils but the cylinder 3 doesn't works yet.
I disconnected cylinder 3 spark-plug and the idle is the same.
I exchanged spark-plug, cable, diaphragm, needle of the cyl. 1 with the cyl. 3, but the problem is still on cyl. 3.
I touched the exhaust collector of cyl 2 and 3, at the idle cyl.3 remains cold.
Only after accelerating it becames hot.
After reassembling the carburetors, I reduced the idle speed, probably I have to resynchronize the carbs.
I think the valve are OK because I succeeded in carbs sync.
But, in order to be sure about the valve, I would like measure the compression.
Where can i buy a manometer for this purpose ?
After the compression test I will try to move jets from cyl.1 to 3.
Are there any other part which I can exchange between carbs/cylinders ?
